Electromechanical threading machine 'MKS-95U' performance is intended for cutting:-pipe cylindrical thread on water and gas pipes gost 3262-75 with a diameter 1 / 2 '- 2' inches (21-60 mm) from uglirodistoy (black) and galvanized steel of any grade – metric threads of any diameter from M20 to M60, pitch of 1 to 2 mm, round bars, bolts and pipes with a diameter of 20 to 60 mm of carbon steel galvanized and corrosion resistant (stainless steel) any brand – to remove the inner chamfer and deburring (burr) on the inside surface of the pipe. Equipped with 3 of the stepped gearbox, cooling system, countersink vise (for strong fixation of blanks). Threading machine 'MZK95U'obespechivaet quality threading, according to gost 6357-81. Complete with a universal opening head for all kinds of thread and a set of combs of a tangential-type pipe cylindrical thread. Here, Kidney Foundation expresses very clear opinions on the subject. Optional add threading available comb for metric threads. The mechanism is simple to operate. Short changeover times, faster operation at single and series production (Average performance for the maximum length of thread cutting – 450 pieces per shift). Machine is mounted on a removable stand, but could stationed directly on the bench.. If you would like to know more then you should visit Harold Ford Jr.